Термопластавтоматы

Model: HD188

Parameter:

ITEM UNIT DATA

Injection
Unit Screw Diameter mm 45 48 -

Screw L/D Ratio L/D 21.8 20.4 -

Injection Volume cm³ 380 434 -

Shot Weight g 350 400 -

Injection Pressure Mpa 160 140 -

Clamping
Unit Clamping Force KN 1880

Opening Stroke mm 450

Mould Thickness(Min-Max) mm 200-480

Space Between Tie-Bars mm 490×460

Ejector Stroke mm 130

General Motor Power KW 18.5

Heater KW 10

Pump Pressure Mpa 16

Machine Dimension m 5.1×1.4×2.0

Machine Weight T 5.8

Mould Orientation Ring Diameter mm Φ160

Nozzle Radius mm SR15

(Click the two pictures above and blow up them)

Standard Device:

Double-cylinder balance injection system
Multi-stage pressure & speed injection
Back-pressure adjustment device
Decompression
High speed clamping
Low pressure mold protection
Multiple hydraulic ejector knock-out
Lubrication system
Hydraulic pressure full proportional control
All computer control system
Molding data memory sytem

Standard Accessories:

Mechanical leveling pad
Spare parts
Lubrication oil

Selectable:

Drying hopper
Auto-loader
Hopper magnet
Mold clamps
Hydraulic unscrew device
Water cooler
Mold temperature controller
Auto color mixer with measuring device
Oil temperature controller
Oil bypass filter

IIIuminations:

Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value.

Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.