Model: HDX88
 

Model: HDX88

 

Parameter

ITEM UNIT DATA
Injection
Unit
Screw Diameter mm  35  38  40
Screw L/D Ratio L/D  21.7  20  19
Injection Volume cm3  144  170  188
Shot Weight g  131  155  171
Plasticizing Capacity g/s  10  13  15
Injection Rate g/s  82  96  106
Injection Pressure Mpa  194  165  149
Clamping
Unit
Clamping Force KN  880
Opening Stroke mm  320
Mould Thickness(Min-Max) mm  150-360
Space Between Tie-Bars mm  365×365
Hydraulic Ejection KN  38
Ejector Stroke mm  100
General Motor Power KW  11
Heater KW  6.3
Pump Pressure Mpa  16
Machine Dimension m  4.4×1.3×1.7
Machine Weight T  2.8
Mould Orientation Ring Diameter mm  125
Nozzle Radius mm  SR10

    

(Click the two pictures above and blow up them)

Standard Device

  1. Double-cylinder balance injection system
  2. Multi-stage pressure & speed injection
  3. Back-pressure adjustment device
  4. Decompression
  5. High speed clamping
  6. Low pressure mold protection
  7. Multiple hydraulic ejector knock-out
  8. Lubrication system
  9. Hydraulic pressure full proportional control
  10. All computer control system
  11. Molding data memory sytem

Standard Accessories

  1. Mechanical leveling pad
  2. Spare parts
  3. Lubrication oil

Selectable

  1. Drying hopper
  2. Auto-loader
  3. Hopper magnet
  4. Mold clamps
  5. Hydraulic unscrew device
  6. Water cooler
  7. Mold temperature controller
  8. Auto color mixer with measuring device
  9. Oil temperature controller
  10. Oil bypass filter

IIIuminations

Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value

Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.

 
Rambler's Top100    
О Компании Напишите Нам Контакты