Parameter
ITEM |
UNIT |
DATA |
Injection Unit |
Screw Diameter |
mm |
80 |
85 |
90 |
Screw L/D Ratio |
L/D |
21.1 |
19.9 |
18.8 |
Injection Volume |
cm3 |
2211 |
2496 |
2798 |
Shot Weight |
g |
2012 |
2271 |
2546 |
Plasticizing Capacity |
g/s |
|
|
|
Injection Rate |
g/s |
|
|
|
Injection Pressure |
Mpa |
178 |
156 |
141 |
Clamping Unit |
Clamping Force |
KN |
5680 |
Opening Stroke |
mm |
830 |
Mould Thickness(Min-Max) |
mm |
350-830 |
Space Between Tie-Bars |
mm |
830×830 |
Hydraulic Ejection |
KN |
152 |
Ejector Stroke |
mm |
220 |
General |
Motor Power |
KW |
55 |
Heater |
KW |
34.2 |
Pump Pressure |
Mpa |
16 |
Machine Dimension |
m |
9×2.0×2.7 |
Machine Weight |
T |
24 |
Mould Orientation Ring Diameter |
mm |
Φ200 |
Nozzle Radius |
mm |
SR15 |

(Click the two pictures above and blow up them)
Standard Device
- Double-cylinder balance injection system
- Multi-stage pressure & speed injection
- Back-pressure adjustment device
- Decompression
- High speed clamping
- Low pressure mold protection
- Multiple hydraulic ejector knock-out
- Lubrication system
- Hydraulic pressure full proportional control
- All computer control system
- Molding data memory sytem
Standard Accessories
- Mechanical leveling pad
- Spare parts
- Lubrication oil
Selectable
- Drying hopper
- Auto-loader
- Hopper magnet
- Mold clamps
- Hydraulic unscrew device
- Water cooler
- Mold temperature controller
- Auto color mixer with measuring device
- Oil temperature controller
- Oil bypass filter
IIIuminations
Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value
Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.
|