Model: HDX388

 

Parameter

ITEM UNIT DATA
Injection
Unit
Screw Diameter mm  70  75  80
Screw L/D Ratio L/D  20.1  18.8  17.6
Injection Volume cm3  1242  1426  1623
Shot Weight g  1131  1298  1477
Plasticizing Capacity g/s      
Injection Rate g/s      
Injection Pressure Mpa  180  156  138
Clamping
Unit
Clamping Force KN  3880
Opening Stroke mm  665
Mould Thickness(Min-Max) mm  250-750
Space Between Tie-Bars mm  720×720
Hydraulic Ejection KN  102
Ejector Stroke mm  200
General Motor Power KW  37
Heater KW  24.3
Pump Pressure Mpa  16
Machine Dimension m  7.3×1.9×2.5
Machine Weight T  14.5
Mould Orientation Ring Diameter mm  Φ160
Nozzle Radius mm  SR15

    

(Click the two pictures above and blow up them)

Standard Device

  1. Double-cylinder balance injection system
  2. Multi-stage pressure & speed injection
  3. Back-pressure adjustment device
  4. Decompression
  5. High speed clamping
  6. Low pressure mold protection
  7. Multiple hydraulic ejector knock-out
  8. Lubrication system
  9. Hydraulic pressure full proportional control
  10. All computer control system
  11. Molding data memory sytem

Standard Accessories

  1. Mechanical leveling pad
  2. Spare parts
  3. Lubrication oil

Selectable

  1. Drying hopper
  2. Auto-loader
  3. Hopper magnet
  4. Mold clamps
  5. Hydraulic unscrew device
  6. Water cooler
  7. Mold temperature controller
  8. Auto color mixer with measuring device
  9. Oil temperature controller
  10. Oil bypass filter

IIIuminations

Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value

Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.

 
Rambler's Top100    
О Компании Напишите Нам Контакты