Model: HDX328
 

Model: HDX328

 

Parameter

ITEM UNIT DATA
Injection
Unit
Screw Diameter mm  60  67  70
Screw L/D Ratio L/D  22.9  21  20.1
Injection Volume cm3  740  923  1008
Shot Weight g  674  840  917
Plasticizing Capacity g/s      
Injection Rate g/s      
Injection Pressure Mpa  213  171  157
Clamping
Unit
Clamping Force KN  3280
Opening Stroke mm  585
Mould Thickness(Min-Max) mm  250-660
Space Between Tie-Bars mm  640×600
Hydraulic Ejection KN  62
Ejector Stroke mm  165
General Motor Power KW  30
Heater KW  21.2
Pump Pressure Mpa  16
Machine Dimension m  6.5×1.8×2.3
Machine Weight T  10.8
Mould Orientation Ring Diameter mm  Φ160
Nozzle Radius mm  SR15

    

(Click the two pictures above and blow up them)

Standard Device

  1. Double-cylinder balance injection system
  2. Multi-stage pressure & speed injection
  3. Back-pressure adjustment device
  4. Decompression
  5. High speed clamping
  6. Low pressure mold protection
  7. Multiple hydraulic ejector knock-out
  8. Lubrication system
  9. Hydraulic pressure full proportional control
  10. All computer control system
  11. Molding data memory sytem

Standard Accessories

  1. Mechanical leveling pad
  2. Spare parts
  3. Lubrication oil

Selectable

  1. Drying hopper
  2. Auto-loader
  3. Hopper magnet
  4. Mold clamps
  5. Hydraulic unscrew device
  6. Water cooler
  7. Mold temperature controller
  8. Auto color mixer with measuring device
  9. Oil temperature controller
  10. Oil bypass filter

IIIuminations

Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value

Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.

 
Rambler's Top100    
О Компании Напишите Нам Контакты