Model: HDX258
 

Model: HDX258

 

Parameter

ITEM UNIT DATA
Injection
Unit
Screw Diameter mm  50  55  60
Screw L/D Ratio L/D  22.9  20.8  19.1
Injection Volume cm3  461  558  664
Shot Weight g  420  508  604
Plasticizing Capacity g/s  40  48  56
Injection Rate g/s  235  276  293
Injection Pressure Mpa  212  175  147
Clamping
Unit
Clamping Force KN  2580
Opening Stroke mm  545
Mould Thickness(Min-Max) mm  220-580
Space Between Tie-Bars mm  575×575
Hydraulic Ejection KN  62
Ejector Stroke mm  165
General Motor Power KW  22
Heater KW  20.3
Pump Pressure Mpa  16
Machine Dimension m  6.0×1.6×2.2
Machine Weight T  8.8
Mould Orientation Ring Diameter mm  160
Nozzle Radius mm  SR15

    

(Click the two pictures above and blow up them)

Standard Device

  1. Double-cylinder balance injection system
  2. Multi-stage pressure & speed injection
  3. Back-pressure adjustment device
  4. Decompression
  5. High speed clamping
  6. Low pressure mold protection
  7. Multiple hydraulic ejector knock-out
  8. Lubrication system
  9. Hydraulic pressure full proportional control
  10. All computer control system
  11. Molding data memory sytem

Standard Accessories

  1. Mechanical leveling pad
  2. Spare parts
  3. Lubrication

Selectable

  1. Drying hopper
  2. Auto-loader
  3. Hopper magnet
  4. Mold clamps
  5. Hydraulic unscrew device
  6. Water cooler
  7. Mold temperature controller
  8. Auto color mixer with measuring device
  9. Oil temperature controller
  10. Oil bypass filter

IIIuminations

Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value

Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.

 
Rambler's Top100    
О Компании Напишите Нам Контакты