Model: HDX208
 

Model: HDX208

Parameter

ITEM UNIT DATA
Injection
Unit
Screw Diameter mm  45  50  55
Screw L/D Ratio L/D  22.8  20.5  18.6
Injection Volume cm3  337  416  503
Shot Weight g  307  379  458
Plasticizing Capacity g/s  28  35  45
Injection Rate g/s  160  182  220
Injection Pressure Mpa  228  184  152
Clamping
Unit
Clamping Force KN  2080
Opening Stroke mm  475
Mould Thickness(Min-Max) mm  200-520
Space Between Tie-Bars mm  515×515
Hydraulic Ejection KN  62
Ejector Stroke mm  165
General Motor Power KW  18.5
Heater KW  18.6
Pump Pressure Mpa  16
Machine Dimension m  5.5×1.5×2.2
Machine Weight T  6.8
Mould Orientation Ring Diameter mm  160
Nozzle Radius mm  SR15

    

(Click the two pictures above and blow up them)

Standard Device

  1. Double-cylinder balance injection system
  2. Multi-stage pressure & speed injection
  3. Back-pressure adjustment device
  4. Decompression
  5. High speed clamping
  6. Low pressure mold protection
  7. Multiple hydraulic ejector knock-out
  8. Lubrication system
  9. Hydraulic pressure full proportional control
  10. All computer control system
  11. Molding data memory sytem

Standard Accessories

  1. Mechanical leveling pad
  2. Spare parts
  3. Lubrication oil

Selectable

  1. Drying hopper
  2. Auto-loader
  3. Hopper magnet
  4. Mold clamps
  5. Hydraulic unscrew device
  6. Water cooler
  7. Mold temperature controller
  8. Auto color mixer with measuring device
  9. Oil temperature controller
  10. Oil bypass filter

IIIuminations

Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value

Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.

 
Rambler's Top100    
О Компании Напишите Нам Контакты