Model: HDX128
 

Model: HDX128

 

Parameter

ITEM UNIT DATA
Injection
Unit
Screw Diameter mm  38  40  43
Screw L/D Ratio L/D  21.1  20  18.6
Injection Volume cm3  181  201  232
Shot Weight g  165  183  211
Plasticizing Capacity g/s  13  15  17
Injection Rate g/s  103  114  132
Injection Pressure Mpa  177  160  138
Clamping
Unit
Clamping Force KN  1280
Opening Stroke mm  360
Mould Thickness(Min-Max) mm  150-430
Space Between Tie-Bars mm  410×410
Hydraulic Ejection KN  38
Ejector Stroke mm  130
General Motor Power KW  13
Heater KW  9.7
Pump Pressure Mpa  16
Machine Dimension m  4.8×1.3×1.8
Machine Weight T  3.8
Mould Orientation Ring Diameter mm  125
Nozzle Radius mm  SR10

    

(Click the two pictures above and blow up them)

Standard Device

  1. Double-cylinder balance injection system
  2. Multi-stage pressure & speed injection
  3. Back-pressure adjustment device
  4. Decompression
  5. High speed clamping
  6. Low pressure mold protection
  7. Multiple hydraulic ejector knock-out
  8. Lubrication system
  9. Hydraulic pressure full proportional control
  10. All computer control system
  11. Molding data memory sytem

Standard Accessories

  1. Mechanical leveling pad
  2. Spare parts
  3. Lubrication oil

Selectable

  1. Drying hopper
  2. Auto-loader
  3. Hopper magnet
  4. Mold clamps
  5. Hydraulic unscrew device
  6. Water cooler
  7. Mold temperature controller
  8. Auto color mixer with measuring device
  9. Oil temperature controller
  10. Oil bypass filter

IIIuminations

Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value

Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.

 
Rambler's Top100    
О Компании Напишите Нам Контакты