Model: HD530
 

Model: HD530

Parameter

ITEM UNIT DATA
Injection
Unit
Screw Diameter mm 80 85 90
Screw L/D Ratio L/D 21.1 19.9 18.8
Injection Volume cm3 1970 2224 2493
Shot Weight g 1790 2024 2269
Injection Pressure Mpa 168 149 141
Clamping
Unit
Clamping Force KN 5300
Opening Stroke mm 750
Mould Thickness(Min-Max) mm 350-800
Space Between Tie-Bars mm 810×710
Ejector Stroke mm 200
General Motor Power KW 45
Heater KW 34.1
Pump Pressure Mpa 16
Machine Dimension m 8.5×2.1×2.7
Machine Weight T 20
Mould Orientation Ring Diameter mm Φ200
Nozzle Radius mm SR15

  

(Click the two pictures above and blow up them)

Standard Device

  1. Double-cylinder balance injection system
  2. Multi-stage pressure & speed injection
  3. Back-pressure adjustment device
  4. Decompression
  5. High speed clamping
  6. Low pressure mold protection
  7. Multiple hydraulic ejector knock-out
  8. Lubrication system
  9. Hydraulic pressure full proportional control
  10. All computer control system
  11. Molding data memory sytem

Standard Accessories

  1. Mechanical leveling pad
  2. Spare parts
  3. Lubrication oil

Selectable

  1. Drying hopper
  2. Auto-loader
  3. Hopper magnet
  4. Mold clamps
  5. Hydraulic unscrew device
  6. Water cooler
  7. Mold temperature controller
  8. Auto color mixer with measuring device
  9. Oil temperature controller
  10. Oil bypass filter

IIIuminations

Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value

Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.

 
Rambler's Top100    
О Компании Напишите Нам Контакты