Model: HD380

Parameter

ITEM UNIT DATA
Injection
Unit
Screw Diameter mm 67 70 75
Screw L/D Ratio L/D 20.9 20 18.7
Injection Volume cm3 1128 1231 1414
Shot Weight g 1026 1120 1287
Injection Pressure Mpa 171 157 140
Clamping
Unit
Clamping Force KN 3800
Opening Stroke mm 605
Mould Thickness(Min-Max) mm 300-750
Space Between Tie-Bars mm 680×600
Ejector Stroke mm 125
General Motor Power KW 34
Heater KW 24.3
Pump Pressure Mpa 16
Machine Dimension m 6.7×1.9×2.3
Machine Weight T 12
Mould Orientation Ring Diameter mm Φ160
Nozzle Radius mm SR15

  

(Click the two pictures above and blow up them)

Standard Device:

  1. Double-cylinder balance injection system
  2. Multi-stage pressure & speed injection
  3. Back-pressure adjustment device
  4. Decompression
  5. High speed clamping
  6. Low pressure mold protection
  7. Multiple hydraulic ejector knock-out
  8. Lubrication system
  9. Hydraulic pressure full proportional control
  10. All computer control system
  11. Molding data memory sytem

Standard Accessories:

  1. Mechanical leveling pad
  2. Spare parts
  3. Lubrication oil

Selectable:

  1. Drying hopper
  2. Auto-loader
  3. Hopper magnet
  4. Mold clamps
  5. Hydraulic unscrew device
  6. Water cooler
  7. Mold temperature controller
  8. Auto color mixer with measuring device
  9. Oil temperature controller
  10. Oil bypass filter

IIIuminations

Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value

Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.

 
Rambler's Top100    
О Компании Напишите Нам Контакты