Parameter
ITEM |
UNIT |
DATA |
Injection Unit |
Screw Diameter |
mm |
|
Screw L/D Ratio |
L/D |
|
Injection Volume |
cm3 |
|
Shot Weight |
g |
|
Injection Pressure |
Mpa |
|
Clamping Unit |
Clamping Force |
KN |
|
Opening Stroke |
mm |
|
Mould Thickness(Min-Max) |
mm |
|
Space Between Tie-Bars |
mm |
|
Ejector Stroke |
mm |
|
General |
Motor Power |
KW |
|
Heater |
KW |
|
Pump Pressure |
Mpa |
|
Machine Dimension |
m |
|
Machine Weight |
T |
|
Mould Orientation Ring Diameter |
mm |
|
|

(Click the two pictures above and blow up them)
Standard Device
- Double-cylinder balance injection system
- Multi-stage pressure & speed injection
- Back-pressure adjustment device
- Decompression
- High speed clamping
- Low pressure mold protection
- Multiple hydraulic ejector knock-out
- Lubrication system
- Hydraulic pressure full proportional control
- All computer control system
- Molding data memory sytem
Standard Accessories
- Mechanical leveling pad
- Spare parts
- Lubrication oil
Selectable
- Drying hopper
- Auto-loader
- Hopper magnet
- Mold clamps
- Hydraulic unscrew device
- Water cooler
- Mold temperature controller
- Auto color mixer with measuring device
- Oil temperature controller
- Oil bypass filter
IIIuminations
Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value
Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.
|