Model: HD2500

 

Parameter

ITEM UNIT DATA
Injection
Unit
Screw Diameter mm 160 175 185
Screw L/D Ratio L/D 19.6 20 20
Injection Volume cm3 17693 22129 28493
Shot Weight g 16101 20137 25929
Injection Pressure Mpa 138 147 146
Clamping
Unit
Clamping Force KN 25000
Opening Stroke mm 1850
Mould Thickness(Min-Max) mm 700-1800
Space Between Tie-Bars mm 1820×1720
Ejector Stroke mm 480
General Motor Power KW 55×4
Heater KW 149.2
Pump Pressure Mpa 16
Machine Dimension m 18.5×3.6×5
Machine Weight T 185
Mould Orientation Ring Diameter mm Φ315
Nozzle Radius mm SR30

    

(Click the two pictures above and blow up them)

Standard Device

  1. Double-cylinder balance injection system
  2. Multi-stage pressure & speed injection
  3. Back-pressure adjustment device
  4. Decompression
  5. High speed clamping
  6. Low pressure mold protection
  7. Multiple hydraulic ejector knock-out
  8. Lubrication system
  9. Hydraulic pressure full proportional control
  10. All computer control system
  11. Molding data memory sytem

Standard Accessories

  1. Mechanical leveling pad
  2. Spare parts
  3. Lubrication oil

Selectable

  1. Drying hopper
  2. Auto-loader
  3. Hopper magnet
  4. Mold clamps
  5. Hydraulic unscrew device
  6. Water cooler
  7. Mold temperature controller
  8. Auto color mixer with measuring device
  9. Oil temperature controller
  10. Oil bypass filter

IIIuminations

Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value

Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.

 
Rambler's Top100    
О Компании Напишите Нам Контакты