Model: HD238


Screw Diameter mm 50 55 60
Screw L/D Ratio L/D 22.9 20.8 19.1
Injection Volume cm3 462 558 654
Shot Weight g 420 500 605
Injection Pressure Mpa 195 161 140
Clamping Force KN 2380
Opening Stroke mm 500
Mould Thickness(Min-Max) mm 200-500
Space Between Tie-Bars mm 540ЎБ500
Ejector Stroke mm 150
General Motor Power KW 18.5
Heater KW 18.6
Pump Pressure Mpa 16
Machine Dimension m 5.4ЎБ1.6ЎБ2.2
Machine Weight T 7
Mould Orientation Ring Diameter mm ¦µ160
Nozzle Radius mm SR15

(Click the two pictures above and blow up them)

Standard Device

  1. Double-cylinder balance injection system
  2. Multi-stage pressure & speed injection
  3. Back-pressure adjustment device
  4. Decompression
  5. High speed clamping
  6. Low pressure mold protection
  7. Multiple hydraulic ejector knock-out
  8. Lubrication system
  9. Hydraulic pressure full proportional control
  10. All computer control system
  11. Molding data memory sytem

Standard Accessories

  1. Mechanical leveling pad
  2. Spare parts
  3. Lubrication oil


  1. Drying hopper
  2. Auto-loader
  3. Hopper magnet
  4. Mold clamps
  5. Hydraulic unscrew device
  6. Water cooler
  7. Mold temperature controller
  8. Auto color mixer with measuring device
  9. Oil temperature controller
  10. Oil bypass filter


Theoretics shot capacity=(plastic injector feeder section area)ЎБ(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value

Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.

Rambler's Top100    
О Компании Напишите Нам Контакты