Model: HD2000

Parameter

ITEM UNIT DATA
Injection
Unit
Screw Diameter mm 140 150 160
Screw L/D Ratio L/D 22.4 20.9 19.6
Injection Volume cm3 11083 12723 14476
Shot Weight g 10000 12000 13174
Injection Pressure Mpa 154 135 120
Clamping
Unit
Clamping Force KN 20000
Opening Stroke mm 1680
Mould Thickness(Min-Max) mm 700-1600
Space Between Tie-Bars mm 1650×1550
Ejector Stroke mm 450
General Motor Power KW 45+45+45
Heater KW 94.5
Pump Pressure Mpa 16
Machine Dimension m 15.3×3.8×4.2
Machine Weight T 148
Mould Orientation Ring Diameter mm Φ315
Nozzle Radius mm SR20

    

(Click the two pictures above and blow up them)

Standard Device

  1. Double-cylinder balance injection system
  2. Multi-stage pressure & speed injection
  3. Back-pressure adjustment device
  4. Decompression
  5. High speed clamping
  6. Low pressure mold protection
  7. Multiple hydraulic ejector knock-out
  8. Lubrication system
  9. Hydraulic pressure full proportional control
  10. All computer control system
  11. Molding data memory sytem

Standard Accessories

  1. Mechanical leveling pad
  2. Spare parts
  3. Lubrication oil

Selectable

  1. Drying hopper
  2. Auto-loader
  3. Hopper magnet
  4. Mold clamps
  5. Hydraulic unscrew device
  6. Water cooler
  7. Mold temperature controller
  8. Auto color mixer with measuring device
  9. Oil temperature controller
  10. Oil bypass filter

IIIuminations

Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value

Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.

 
Rambler's Top100    
О Компании Напишите Нам Контакты