Model: HD160

Параметры ТПА:

Параметр		ед.изм	Данные
Injection Unit	Дияметр шнека	mm	40	45	48
	Отношение дл.- диаметр	L/D	22.5	20	18.8
	Объём впрыска	cm³	245	310	353
	Вес изделия	g	223	282	321
	Injection Pressure	Mpa	202	160	140
Clamping Unit	Clamping Force	KN	1600
	Opening Stroke	mm	400
	Mould Thickness(Min-Max)	mm	180-450
	Space Between Tie-Bars	mm	450ЎБ410
	Ejector Stroke	mm	100
General	Motor Power	KW	15
	Heater	KW	10
	Pump Pressure	Mpa	16
	Machine Dimension	m	4.4ЎБ1.3ЎБ1.9
	Machine Weight	T	4.8
	Mould Orientation Ring Diameter	mm	¦µ125
	Nozzle Radius	mm	SR15

(Click the two pictures above and blow up them)

Standard Device

Double-cylinder balance injection system
Multi-stage pressure & speed injection
Back-pressure adjustment device
Decompression
High speed clamping
Low pressure mold protection
Multiple hydraulic ejector knock-out
Lubrication system
Hydraulic pressure full proportional control
All computer control system
Molding data memory sytem

Standard Accessories

Mechanical leveling pad
Spare parts
Lubrication oil

Selectable

Drying hopper
Auto-loader
Hopper magnet
Mold clamps
Hydraulic unscrew device
Water cooler
Mold temperature controller
Auto color mixer with measuring device
Oil temperature controller
Oil bypass filter

IIIuminations

Theoretics shot capacity=(plastic injector feeder section area)ЎБ(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value

Notes: The machine pictures are for your visual reference, may have trivial difference from the actual machines.